News
The rust of the spindle of the CNC cutting machine is a problem that plagues many users. Due to the influence of the environment, the machine inevitably rusts. Slight rust does not affect the normal use of the spindle motor, but if left untreated for a long time, it will shorten the life of the spindle motor. How do we derust the rusty spindle?
In-line machining center
1. Rely on manual knocking, shoveling, scraping, brushing, sand or flexible frustration to remove surface rust, scale, etc. This is a radical rust removal method for painters. You can also use a shovel, scraper, pointed hammer, and wire brush , Emery cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine, maintenance personnel should be very careful when performing rust removal, a little carelessness will easily cause the machine spindle to deviate from the track.
2. Use a cleaning lubricant and spray it evenly on the motor. You can use a cotton cloth to wipe off the rust on the stone engraving machine in about half an hour. If the rust is severe, you can spray the lubricant several times. The lubricant is not conductive, and It has a good lubrication effect. In order to avoid the rust of the spindle of the CNC cutting machine, it is recommended that you pay attention to daily maintenance and improve the production environment when using it.
